Home About us Products Models News Honor Network Contact us Substation
location:Home > self aligning ball bearing for miningNews > Self aligning ball bearing early damage mode

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Self aligning ball bearing early damage mode
Clicks:10100 Date:11-6
Bearing in the normal application process; due to the gradual wear until eventually lost work, using his talent to end its natural damage; this is difficult to avoid. But if the result of the proposed machine equipment adjustment, improper lubricating oil due to good quality or the use of harsh conditions and other factors resulting in premature bearing wear or damage is the early damage; human form. Early damage not only greatly reduce the bearing using life together; it will affect the normal work of the proposed machine.
According to the experience of repairing diesel engine for a long time, it is found that mechanical damage, bearing pitting, fatigue pitting, corrosion and so on are the most common methods for the early damage of sliding bearings
The mechanical damage of sliding bearing mechanical damage is not the same degree of grooves appear serious bearing alloy surface; when in contact with the surface of the metal strip and a large area of the messy scratch, under normal circumstances; contact surface damage and erosion. The main reasons exist together constitute a representation of mechanical damage to the bearing bearing surface is difficult to form oil film or the oil film was seriously damaged.
Bearing cavitation sliding bearing in cylinder pressure under the action of repeated impact load); surface layer of plastic deformation and cold hardening deformation; some loss of talent; gradually formed pattern and expanding; followed by falling debris; in loading surface layer bearing hole. General occurrence cavitation is the first; in the pit; then the pits gradually expand and cause cracking of alloy layer interface; crack parallel to the interface expansion; until the fall aborted. The main reason is bearing cavitation; because of cross section of the oil groove and holes and other planning elements of the sudden changes of oil flow in the oil flow violent disorder; vacuum disorders a bubble; then the pressure increased; and the occurrence of cavitation bubble collapse. Cavitation occurs in the high area of the bearing; such as crankshaft main bearings on the bearing.
Previous article: Self aligning ball bearing affects the quality of roller parts      Next article: Matching precision of self aligning ball bearing
Recommended reading
How to repair the self aligning ball bearing overheating problem? 2018.1.15
Causes and maintenance measures that cause damage to self aligning bal 2017.12.23
Causes and treatment methods for oil leakage of self aligning ball bea 2018.1.4
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.