Home About us Products Models News Honor Network Contact us Substation
location:Home > self aligning ball bearing for miningNews > Self aligning ball bearing installation steps

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Self aligning ball bearing installation steps
Clicks:2416 Date:12-15
Self aligning ball bearing uses smooth metal balls or rollers as well as lubricating inner and outer metal surfaces to reduce friction. These balls or rollers "bear" the load, supporting the spindle of the motor so that the motor (rotor) can be rotated smoothly.
(1) bearing with kerosene wash, pressure bearing, roller bearing outer ring to fill at Shell No. three to 2/3 full wash grease, evenly, mounted on the bearing cover, with coated bolt fastening bolt pressing bearing gland pine gum;
(2) the bearing is a detachable cylindrical roller bearing with internal and external sleeves. The bearing should be fitted to the rotating shaft and in place.
(3) bearing the bearing seat on the shell, if there is a grease injection hole, it must be aligned. Tighten the bearing seat with the fastening bolts coated with bolts.
(4) the eccentric block inside and outside is installed on the rotating shaft and is in place. The shaft key should be loaded into the key slot and reload the outer eccentric block, and the shaft is mounted on the rotating shaft with the shaft.
(5) fasten the fastening bolt of the eccentric block, rotate the adjustable eccentric block, make it reach the angle position before unloading and tighten the fastening bolt. After the completion of the above assembly, the shaft should be subjected to a certain axial movement.
(6) the protective cover on both ends of the vibration motor is fastened with a screw.
Previous article: Self aligning ball bearing replacement step      Next article: Self aligning ball bearing check the working state of the sound
Recommended reading
Collaboration and clearance of self aligning ball bearing 2018.1.10
Selection of self aligning ball bearing 2018.1.4
The common sense of self aligning ball bearing 2018.1.10
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.