In order to ensure high functionality and equipment repair and maintenance, low cost, reliable operation, it is necessary to be the right approach. This includes the transfer of clean storage inspection and assembly. It applies to all rolling bearings plan. Bearing shops has extra anti-corrosion coating selection, but most camps are not corrosion data. Bearing in handling and storage, it is necessary to be careful to ensure that they do not rust or corrode. No wet or maintain contact or a few left glove hand between the chemical can be led in a small area, resulting in fatigue and corrosion and wear. New and reorganized to maintain shipments bearing coating, usually in a paper or other protective cover in a cardboard box or wooden packaging and shipping. When you receive a new or regenerated bearing, not only out of the box ready device application. Not directly on the concrete floor, where you can collect and condensate bearing stick. On shelves cabin or carried out, if not in high humidity and sudden and severe temperature changes would constitute a condensed form area. You always put paper or oil, if not, the effect of the bearing cup and plastic sheeting.
Many bearings are sealed, these bearings throughout life is not the number of demands, plus a smooth fat. For example, other non-sealed bearings double row tapered roller bearings in the apparatus necessary to add oil slick. Since the bearing cavity size is not the same, it is difficult to determine how much added fat, the most important thing is to ensure that the bearings with grease, if too much oil when changing the bearing, the remaining oil will be leaking. Typically experience: when the device, the total amount of fat to 50% of the bearing gap. The main cause of the loss of inventory bearing the following: the impact of the transfer out of the library with the oscillation process of the bearing seizure bruised; because of bad seal or packing seal is valid beyond bad, or warehouse environment to form a bearing corrosion; temperature undesirably warehouse or handle poor, so rapid onset metallurgical bearing arrangements change, resulting in its dimensions and shape precision. |
