Safe operating specification of the conveyor

idler bearing

1. The operating personnel must have enough rest before working to ensure full energy at work. Make sure wearing protective equipment before work;

2. For all personnel, during the running of the conveyor idler, it forbids stepping over it and opening the cover board, and the sundries are forbidden to enter the conveyor idler bearing;

3. The torque converter must use specified oil by rule, and the protective shield must be used;

4. If you are not the worker operating the conveyor idler bearing, it is forbidden to enter the passageway of the conveyor idler;

5. It is forbidden for the conveyor idler to work over load;

6. Before the work, check all the components by rule and do the idle running to confirm the machinery is up to the requirements. Check the communication equipment system to confirm the signal clear and exact;

7. After all the check to confirm everything is ok, send the safety confirmation message to the Central Control System, and record the time and name of the operating personnel;

8. Do all the machinery operation according to the signal sent by the Central Control System strictly, and it is forbidden for the operating personnel to check the components which are running;

9. Control the delivery value of the conveyor idler according to the demands of delivery rules to prevent the materials from overflowing or suffering extrusion;

10. It is forbidden for the spot operating personnel to open the protective shield to do the maintenance;

11. We must clear away the material in the conveyor idler bearing before stopping the work to make the machinery stay in the idling condition, and then stop the machine;

12. After the work, do comprehensive clearance and maintenance to the conveyor idler bearing, such as the lubrication and rust protection. If the water cleaning is needed, the electronic components of the machinery should be covered closely to prevent it from being damped.

Sincerely,

Written by Flavio.Xie, China,
Shandong XinKaite Bearing Co. Ltd.,

My Email:03@xinkaite.com